Pure Sine Wave Wide PV Input Range 120-450VDC Solar Hybrid Power Inverters with Battery Connected Key Features:
1.Touch screen display.
2.PV and utility power take the load at same time(can setting).
3.Output power factor PF=1.0.
4.On&Off Grid with energy storage.
5.Energy generated record,load record,history information and fault record.
6.Language and time setting.
7.Structure with dust filter.
8.AC charging and AC output time setting.
9.Charging voltage and charging current timing.
10.External Wi-Fi device optional.
11.Parallel operation up to 12 units .
12.Connected with battery optional.
13.Wide PV input range 120-450VDC.
15.MAX PV Array power 5000W.
16.Solar and Utility supply power to the load when solar power is not sufficient to load.
Wall Mounted Integrated Solar Power Inverter Technical Specification Built-in MPPT Solar Controller
REVO II 3K-24
REVO II 3.2K-48
REVO II 5.5K-48
Max PV Array Power
Rated Output Power
Maximum PV Array Open Circuit Voltage
MPPT Range @ Operating Voltage
GRID OUTPUT (AC)
Nominal Output Voltage
Output Voltage Range
Nominal Output Current
Up to 93.5%
OFF-GRID, HYBRID OPERATION
Acceptable Input Voltage Range
90-280VAC or 170-280 VAC
50Hz/60Hz (Auto sensing)
BATTERY MODE OUTPUT (AC)
Nominal Output Voltage
Output Wave Form
Pure sine wave
BATTERY & CHARGER
Nominal DC Voltage
Maximum Solar Charge Current
Maximum AC Charge Current
Maximum Charge Current
Emergency output power
Maximum output power
Automatic Transfer Time
USB or RS232/Dry-Contact
0~90% RH (No Condensing)
0 to 50 °C
1. How to choose suitable inverter?
If your load is resistive loads, such as: bulbs, you can choose a modified wave inverter. But if it isinductive loads and capacitive loads, we recommend using pure sine wave power inverter.
For example:fans, precision instruments, air conditioner, fridge, coffee machine, computer, and so on.
Modified wavecan be started with some inductive loads, but effect for load using life,because capacitive loads and inductive loads need high quality power.
3. How connection between batteries and an power inverter?
We usually believe that cables connecting battery terminal to inverter shorter is better. If you are just standard cable should be less than 0.5M, but should correspond to the polarity of the batteries and inverter-side outside. If you want to lengthen the distance between battery and inverter, please contact us and we will calculate the recommended cable size and length. Due to long distances using a cable connection, there will be a reduced voltage, which means that the inverter voltage would be far below the battery terminal voltage, this inverter will appear under voltage alarm conditions.